Fire Dragon Spoke
Replacement wicks for all Dark Monk Dragon staves.
$15.00
Dark Monk
https://darkmonklive-dacjercvarcrexcg.eastus2-01.azurewebsites.net/Equipment/Dragon-and-Helio-Wick
Replacement wicks for all Dark Monk Dragon staves.
$15.00
Dark Monk
https://darkmonklive-dacjercvarcrexcg.eastus2-01.azurewebsites.net/Equipment/Dragon-and-Helio-Wick
-
Fire Dragon Spoke
-
Fire Dragon Spoke
Replacement fire dragon spokes for both screw in and hub based dragon staves. The normal legnth option has an overall length of ~6.75 inches, use 2 inch wide Pur Kevlar wicking, and burns approximately 4 minutes with white gas. The pixie length, is about 5.5 inches, with a 3:15 minute burn time. Both configurations minimize the exposed hardware by recessing small screw heads in to the wicking's fold.
We also recommend our "Over Wicking" method to easily and cheaply repair existing wicks.
Body and Wicks
Most severe equipment burns come from searing-hot exposed metal, not from the wicks. The wicks on the staff and the spokes are attached with recessed rivets (less exposed metal than screws and no need for re-tightening), and the staff ends are covered with two wick layers, creating a long-lasting cover for a potentially sharp and hot metal edge.
The normal Dragon Length are 6.75” spokes are primarily made of 1/4” steel cable. This extremely stiff cable provides a small amount of shock absorption that prevents hard drops from damaging the spines or their connection points to the dragon staff body. Each cable has a threaded rod on one end, enabling easy screwing and unscrewing from the dragon staff body. 2" wicks are firmly attached to the other side of each cable. These wicks have an approximate 4:00 minute "white gas" burn time.
The Pixie Dragon Length are very similar in construction but are 5.5" in overall length and use a 1.5" wick. This size has an approximate 3:15 minute burn time with white gas.
Most severe equipment burns come from searing-hot exposed metal, not from the wicks. The wicks on the staff and the spokes are attached with recessed rivets (less exposed metal than screws and no need for re-tightening), and the staff ends are covered with two wick layers, creating a long-lasting cover for a potentially sharp and hot metal edge.
We also recommend our "Over Wicking" method to easily and cheaply repair existing wicks.
- Removable spoke wicks
- Welded and Threaded Option
- Steel cable for shock absorption
- Two sizes available
